Hishiko operates Magnet Applied Equipment division (formerly known as Fuji Jikoh Co. Ltd.)&Special Welding Consumables division.

Electromagnetic Chuck for Cutting　KSFAH

ksfah

Applications

KSFAH is the chuck for heavy duty-cutting for milling machine, planomiller,shaper, planer and etc.

Features

Electromagnetic chuck with strong holding power and most suitable for heavyduty cutting for steel plate.

■KSFAH-F　Air Float Electromagnetic Chuck

The face plate for air float type chuck has small holes. Air is blown out from these holes and the workpiace comes into floating stage.
Hence, even a large workpiece can be smoothly moved, and workpiece can be placed or removed easily without any scratch on the workpiece or the face plate.

KSFAH図面

(mm)

Stock No	Model	Face Plate						Base Plate		Lead Wire Length (m)	Clamps(Pcs.)	Current (DC100V）	Recommended Rectifier	Recommended Controller	Weight(kg)
Stock No	Model	B1	L1	Be	Le	a	b	B2	L2	Lead Wire Length (m)	Clamps(Pcs.)	Current (DC100V）	Recommended Rectifier	Recommended Controller	Weight(kg)
S910609	KSFAH300×600	300	600	240	516	52	34	310	620	3	4	1.47A	KS80×3	KNS0-A or HSC093E or HCC105AES1	130
S910610	KSFAH300×800	300	800	240	712		30	310	820	4	4	2.06A			170
S910615	KSFAH400×600	400	600	340	516		34	410	620	3	6	2.13A			170
S910616	KSFAH400×800		800		712		30		820	4		2.98A			230
S910617	KSFAH400×1000		1000		916		29		1020			3.83A	-	KNS0-A or HCC105AES1	290
S910621	KSFAH500×800	500	800	440	712		30	510	820			3.66A	-	KNS0-A or HCC105AES1	230
S910622	KSFAH500×1000		1000		916		29		1020			4.71A	-	HCC1010AE	360
S910623	KSFAH500×1200		1200		1102		38		1220			5.23A	-	HCC1010AE	440

Controller (HCC type ) does not require rectifier.

Applications

Stock No	Model	Dimensions(mm)			Input Voltage	Output Voltage	Current
Stock No	Model	Width	Height	Depth	Input Voltage	Output Voltage	Current
S980102	KS80×3	150	60	100	AC100V	DC90V	3A
S980113	KS100×5	320	225	200	AC100V/200V	DC24～110V	5A

HSC

Features

Adjusting function of wave pro le for neutralization is added and most relevant wave pro le is indicated by LED. You can nd most relevant wave pro le for neutralization depending upon a workpiece easily.

HSC093E can control by external signal hence it is easy to install to a Machinery.

Stock No	Model	Dimensions （mm）			Input Voltage	Output Voltage	Output Current	Neutralization Duration	Weight (kg)
Stock No	Model	Width	Height	Depth	Input Voltage	Output Voltage	Output Current	Neutralization Duration	Weight (kg)
S981249	HSC093E	130	240	80	AC100V	DC90V	3A（MAX）	max 13(Sec.)	2

HCC

Features

By high-speed switching using semiconductor, HCC series achieves excellent neutralization result in a short time. Because there is no operating noise during neutralization, it is very quiet.

Stock No	Model	Dimensions (mm)			Input Power Source Voltage	DC Output Rating		Neutralization Duration	Weight (kg)	Note
Stock No	Model	Width	Height	Depth	Input Power Source Voltage	Voltage	Current	Neutralization Duration	Weight (kg)	Note
S9812478	HCC105AES1	130	256	151	AC100V/200V 50/60Hz Single phase	AC100V：DC5～85V AC200V：DC5～100V	5A （MAX）	2～19(Sec.)	2.5	Standard Model
S9812479	HCC105ES2	130	256	151	AC100V/200V 50/60Hz Single phase	AC100V：DC5～85 AC200V：DC5～100	5A （MAX）	2～19(Sec.)	2.5	・External operation is possible. ・Outputting contact signal to external equipment is possible.
S9812456	HCC1010AE	300 (360)	400	200 (235)	AC200V 50/60Hz Single phase	DC5～100	10A MAX）	2～19(Sec.)	11	with Control Box (come with 5m cable)

Note: Total electric current of connected chuck(s) must be within 90% of the maximum output current rating of the controller.