Hishiko Corporation：Round Battery Lifting Magnet

■Lifting Magnet MENU TOP

Round Battery Lifting Magnet BLR

Additional Relief and Safety
Cost Reduction with Compact Design !!

BLR

Applications

Suitable for organizing/managing steel plate or steel products, material distribution work, loading or unloading of workpiece for large machine tool.

Features

By using battery for power supply, no fear of falling accident due to power failure.

Usable at wide range of job sites as a cable from AC power source is not required.

Safe and power saving design with no contact failure by semiconductor non-contact control circuit

Stainless steel plate is welded to the lifting surface to protect the coil.

Red lamp and alarm buzzer notify the battery consumption rate.

Automatic / Manual changeover system for operation.

Able to operate from distance by automatic (ON-OFF) device.

グラフ

Do not lift up elongated workpiece (over 2m) of which thickness is less than 9mm. There is a risk of falling load due to air gap generated by deflection by the load’s own weight

◇SPECIFICATIONS

Stock No.	S960618
Lifting Capacity	15KN (1.5tonf) 　※SS400、(▽▽▽)、t is over 50mm、Air gap 0mm
Rated Voltage	DC 12V
Rated Current	5.35A
Duty Cycle	50％ED （1cycle 10min）
Weight	About 90 kg
Safety alarm buzzer	Alarm buzzer 2-step notice 1st step DC11V: Long intermittent sound 2nd step DC10.5V: Short intermittent ｓound
Operating instruction	Automatic/Manual changeover system
Battery	44B19R　（Battery charger is separately sold)
Accessory	Hydrometer　1set

OPTION

Simplified “RELEASE" Function		Battery Charger	Safety Guard	Shackle & Master Link
	One can separate the over-held work in the process by remote control unit. This makes single work transportation easy. *Please request this option before manufacturing.	HC12-5C(EB)	with Safety Guard

※High performance cycle service battery is available as an optional. Please contact

　Page TOP　　Back