Hishiko Corporation：Permanent Magnetic Chuck

■Magnet Equipment MENU TOP

Permanent Magnetic Chuck　KPFA

KPFA

Features

Most suitable for grinding.

Adopting a ferrite magnet which has anti aging demagnetization property, makes it usable for long time.

KPFA does not use the body as a magnetic circuit. Hence the body does not attract iron powder.

The pole pitch is relatively narrow. Hence KPFA can also hold small or thin works effectively.

KPFA shows small reverse excitation by turning OFF. This makes removing works easier.

Stock No	Model	Face Plate					Pole Pitch	Height	Bottom Plate			Handle		Clamps (pieces)	Weight (kg)
Stock No	Model	B1	L1	Le	C1	C2	P	H	B2	L2	ｈ	(D)	(E)	Clamps (pieces)	Weight (kg)
S906102	KPFA100×175	100	175	141	20.5	13.5	12 （1.5+6+ 1.5+3）	58	98	185	12	141	45	2	5.5
S906104	KPFA125×250	125	250	213	20.5	16.5		58	123	260	12	141	45	2	10
S906105	KPFA150×300	150	300	237	35.5	27.5		60	146	314	16	222	58		17
S906106	KPFA150×350	150	350	285	37.5	27.5		60	146	364	16	222	58		20

The switching handle is detachable.

　Page TOP　　Back

SiteMap Terms of Use

copyright © 2019 Hishiko Corporation All Rights Reserved.